Stainless Steel 3.5" Raw Intake Elbow For 07.5-18 Dodge Cummins 6.7 6.7L Diesel

Description

Stainless Steel 3.5" Raw Intake Elbow For 07.5-18 Dodge Cummins 6.7 6.7L Diesel
Quality & Warranty
3 Years Warranty
The GPP 3.5" Intake Manifold for your 2007.5-2018 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line.
These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower egt's, and less over all strain on your motor.
This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a gasket and hardware to make installing this intake extremely easy.
Features:
Unobstructed 3.5" inlet to two 3" mandrel bent tubes.
2 NPT ports
Fully TIG welded with precise settings to produce optimal penetration without impacting airflow.
50-200 degrees F drop in EGT's
.5-1 MPG increase
Deletes constrictive emissions equipment
Significant gain in throttle response
Faster turbo spool
Note: You will need to delete all of your factory emissions equipment as this manifold does not have provisions to use any of it. This manifold is for off road use only. This product will work with dual CP3's.
Shipping
Return
Customer Service
Feedback
Shipping
Shipping Cost : Free to USA,and more
We ship to eBay address
Return
Refund is valid within 30 days after the date delivered
Refund will be given as money back or replacement
The money less the freight cost will be refunded due to their own fault
Item must be returned in original packing same as reached
Buyers are responsible for the return shipping cost
Customer Service
Business Hours: Monday thru Saturday 8:30am to 5:30pm EST.
Compatibility tables are for reference only and should only be used as guidance so OT Auto Parts recommend checking the part number(OEM number) of your existing unit before purchasing as we cannot take responsibility for incorrect orders placed.
Feedback
Please leave us with positive feedback if you are satisfied with our products and services,if not, please contact us before leave any neutral or negative feedback,we'll try our best to satisfy with you.
Thanks.
On Feb-01-21 at 16:55:04 PST, seller added the following information: