K2 KII 5-LED Gauss Meter EMF Detector Magnetic Field Detector Radiation Detector

Description

Description
K2 KII 5-LED Gauss Meter EMF Detector Magnetic Field Detector Electromagnetic Radiation Detector
What is EMF?
Electromagnetic Fields (EMF) emissions are created whenever electrical power flows through a wire, conductor or appliance; they can not be seen, felt or heard, but they are present in and around all electric lines and devices. EMF emissions are measured in units called milliGauss (mG). The strength of the EMF can vary and is measurable by use of this K-ll EMF Meter.
Why Measure EMF?
EMF emissions are recognized as an environmental agent that are a potential threat to public health. Some scientific evidence suggests links of the biological effects of EMF to childhood leukemia, brain cancer, miscarriages and fetal abnormalities. We are exposed to EMF at home, in the workplace and even outdoors everyday.
What Levels are Safe?
Many studies have determined that the relationship between field strength and health risks also involves other factors which make it impossible to assign exact danger level limits based only on field strength.
Though the US government has not yet provided exact danger level limits, other countries and many states have already set standards for exposure based on field strengths. In general a target of 2 to 3 milliGauss is believed to be a reasonable maximum level for continuous exposure.
The EMF METER measures magnetic field strength. GREEN LED's indicates normal everyday levels of exposure, the higher more suspect field strength readings are indicated by the YELLOW, ORANGE and RED LED displays
What can we do about it?
The easiest thing is to try to reduce your exposure to the fields by practicing "prudent avoidance". Measure all of the electrical appliances and devices at home, at work and when you travel, noting the results on the attached Exposure Log. Then try to avoid the YELLOW / ORANGE / RED range readings by staying far enough away from the appliance to remain in the GREEN range. Rearranging your furniture or appliances, or by using timers on some appliances to reduce exposure when operating can also be effective in reducing your exposure.
Continue to check field sources around and in your home, as well as in the schools or your workplace on a routine basis since fields may change (i.e.: appliances may change due to age or pending failure). Use the EMF METER when you travel, are looking at real estate or when shopping for new appliances.
Description:
The EMF Meter is a compact and easy to use Magnetic Field strength meter. The EMF Meter can be used indoors or outdoors for measuring any electric device or power lines. There are 5 LED's, each represents a field strength range as follows:
Features:
- The special function 5-led indicator represents different radiation values
- Easy to read LED lights in the dark and in the sunlight
- Portable, easy to use, rugged, reliable, and responsive
- Report EMF measurements in five milliGauss ranges
- Used for ultra-normal-wave research and general EMF testing
Operations:
1) Hold the EMF METER with your thumb on the switch
2) Point it toward the EMF source, then depress and hold down the switch (a short flash of the LED's will occur)
3) The LED will indicate the range of the EMF at that level
4) Moving the device from side to side or rotating it may change the reading; the highest reading is most accurate
5) Move closer or further away to the EMF source to determine the "Normal" zone, as indicated by the Green LED
Helpful Hints:
- Record the readings on the enclosed Exposure Log, repeat periodically, since fields can change in strength
- If the GREEN LED (Normal) doesn't light, the battery is low
- To change battery remove the two screws, replace 9V battery
Specifications:
- Detection Range: 0 to 20+ milliGauss
- Detection Frequency: 50/60 Hz (50 to 1000 Hz—ELF) (1000 to 20,000 Hz—VLF)
- Accuracy: 5% (typical)
- Operating Temperature: 0 to 120 Degrees F (-18 to 49C)
- Size & Weight: 5.75 "(L) x 2.25"(W) x 1"(H); 6 ounces
Package Included:
- 1 x EMF Meter
- 1 x User Manual
Note:
- Battery is not included. A 9V battery is recommended.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Mar-03-22 at 19:20:47 PST, seller added the following information: