-40%
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18
AC/DC fwbell gaussmeter model #99002, teslameter, 18

AC/DC fwbell gaussmeter model #99002, teslameter, 18" transverse probe, F.W.bell

$ 844.8

Availability: 100 in stock
  • Frequency Range: 0 to 50 kHz
  • Brand: F.W.bell
  • Condition: This gaussmeter is in very good condition, very accurate and rare to find it in the market with an 18" hard transverse probe, channels 2 and 3 are tested and calibrated. The hard transverse probe is a new one and special custom made design. It is unique very linear with 18" hard stem probe and temperature compensation. Please read the specs in the description section listed below. Also we are asking a fraction what it did cost us to make it.
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Country/Region of Manufacture: United States
  • Item must be returned within: 14 Days
  • Sensor Type: Single Axis
  • Restocking Fee: No
  • Product: AC & DC Gaussmeter

    Description

    The SERIES-9900 gaussmeter represents the latest developments in the science of measuring magnetic flux density using the Hall effect. The unit is available in three configurations capable of processing a single channel (Model 9901), two channels (Model 9902) or three channels (Model 9903) of magnetic field information. Either steady-state (dc) or alternating (ac) fields can be measured. When matched with the appropriate F.W. Bell fourthgeneration Hall generator probe, fields as low as 10 pG (0.0011.1T) or as high as 2.9999 MG (299.99 T), at frequencies up to 50 kHz, can be measured with extreme accuracy and 4-3/4 digit resolution. The SERIES-9900 features PEAK HOLD, AUTORANGING, CLASSIFIER and RELATIVE operation, auto ZEROing, GAUSS or TESLA readout, digital and bargraph representation, diagnostics and remote operation with an IEEE-488 (GPIB) instrumentation bus and an RS-232 communications port. All information is displayed on an illuminated graphics liquid crystal display (LCD). The gaussmeter employs a menu-driven format to allow the user to program all aspects of gaussmeter operation with ease and speed. Each gaussmeter channel is completely and independently programmable.
    FREQUENCY RANGE (Displayed Reading) dc Mode: dc
    ac Mode:
    20 Hz to 50 kHz
    TEMPERATURE RANGE Operating: 0° C to +50° C Storage: -20° C to +70° C
    FRONT PANEL DISPLAY Type: 240 x 64 dot matrix LCD with a backlight Viewing Area: 5.2 in. (13.2 cm) wide, 1.6 in. (4.1 cm) high POWER Volts: 90-125 or 180-250 Frequency: 50-60 Hz 50-60 Hz Current: 2.0 A 1.0 A SIZE 17.67 in. (44.9 cm) wide, 7.53 in. (19.1 cm) high including feet, 16.18 in. (41.1 cm) deep WEIGHT Net: 35.9 lbs. (16.3 kg) (Maximum) Shipping: 43.4 lbs. (19.7 kg) FRONT PANEL ZERO GAUSS CHAMBER Cavity Size: Attenuation: 0.344 in. (0.9 cm) I.D., 2.0 in. (5.1 cm) deep 80 dB in a 300 G field
    COMMUNICATION PORTS R S -232: Standard 25 pin "D" connector IEEE-488: Standard 24 pin IEEE-488 connector
    WARM UP TIME 1 hour to achieve rated specifications
    RANGES RESOLUTION GAUSS TESLA GAUSS TESLA : Range: 3 G /300 uT, Resolution: 1 mG 0.1/ uT
    Range: 30 G/ 3 mT Resolution:1 mG/ 0.1 uT
    Range: 300 G/ 30 mT Rsolution: 10 mG /1 uT
    Range: 3 kG /300 mT Resolution: 100 mG /10 uT
    Range: 30 kG /3 T Resolution:1 G /100 uT
    Range: 300 kG /30 T Resolution: 10 G /1 mT
    Probe: it is a sp
    T-99-284 is a 1X probe. I’ve attached its drawing. The drawing says the cable is only good for 75°C, but I’m pretty sure the cable itself (not connectors) will go to 105°C. The probe body may be only good for 100°C.
    It will work on any 9500, 9900, 9550 or 9950 meter.
    . Probe is similar to a Model HTF99-0618 (item no. 129944)
    also it has more features:
    A. Stem has a brass nose plug.
    B. Hall Generator /Stem is rated from 0
    °
    C TO +150
    °
    C. All
    plastic parts and the cable are rated to
    +
    75
    °
    C only and must be
    protected from exceeding
    +
    75
    °
    C.
    C. Probe cable length is 10 ft.
    ±
    6” instead of 5 ft. and has a brass
    handle.
    2. Electrical specifications:
    Sensitivity:         1X
    Linearity:
    ±
    0.25 % to 30kG
    9
    REF
    YA-3887
    MANUFACTURING NOTES
    8
    REF
    YB-3354-044
    FINAL ASSEMBLY, 4
    th
    GENERATION PROBES
    7
    REF
    YB-2376-009
    STANDARD LINE STEM ASSEMBLY
    6
    REF
    YD3355
    PROBE CABLE ASSEMBLY
    5
    1
    202471
    BA-2421
    NOSE PLUG, .060X.180 TRAN BRASS
    4
    1
    202451
    BA-2115
    STEM, .060X.180X18.45L RECT ALUM
    3
    1
    177663
    JA-1126
    HALL GENERATOR, HI-TEMP
    2
    1
    202470
    BA-2338
    BRASS PROBE BODY
    1
    1
    202755
    STEM SUB-ASSEMBLY
    REF
    QTY
    ITEM NO.
    DRAWING NO.
    DESCRIPTION
    ecial hard transverse made probe with stem length of 18" and 10 ft cable with temp. compensation.