0.01-2T PSH1-10 Tesla meter Gauss meter an-g HP Agilent Bell Alpha Lab

Description

Gauss meter
SH1
-
10
analog of  Lutron,
Advantest, Avtech,
HP Agilent,
NoiseCom,
General Radio, Boonton, Anritsu, Fluke and general Electric, but  has the same or better characteristics.
This device can be used for wide measurement
range
.
Gauss meter
PSH1
-10
(
Hall effect) is designed to:
- process automation measurement
;
-
measured value
in magnetic induction units digital indication
;
- measurement results
output
in digital
code
to an external
recording
device;
Device gauss meter
PSH1
-10
is
Hall
magnetometer
designed to measure
constant
magnetic fields
induction
of magnets
,
electromagnets and
solenoids.
Device
can measure
magnets
and solenoids magnetic fields
.
Provides measurement results
indication for external
recording
and actuators devices
.
Device gauss meter
PSH - 10 has four-digit
display,
calibrated
in magnetic induction units.
There is
magnetic field polarity indicator
.
Hall effect is used to measure magnetic field.
Hall voltage is
proportional to
measured
magnetic induction,
after amplification
and detection
of absolute level
converted to
binary-
decimal code,
shown of measurement results at device digital
display
and
connector for
external
recording devices
.
Device gauss meter
PSH1
-10
automatically
select
and switch
measurement limits,
magnetic
field polarity, control
digital display performance.
Count
quantity being measured
in magnetic induction units.
Condition:
NEW (not used, an old stock). Tested and 100% workable.
If necessary, we can provide calibration certificate from Government standardization institute
(+145-265usd).
Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons.
Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons.
Please take a look on my other items!
If you haven’t found the needed item in my listing, please contact me. I’ll try to help you.
Technical
characteristics of device
gauss meter
SH1
-10
:
Magnetic induction measurement range
:
- 0.01
T
-
2T
(
magnets and
electromagnets
);
- 0.01
T
-0.
3T
(solenoids
).
Device
gauss meter
PSH1 magnetic induction
measurement basic error
-
10
:
-
± (1.5 +10 /
Vmeas
)%
- 0.01
T
= 0.1 T
;
-
± 1.5% -
more than 0.1
mT,
where
Vmeas
-
measured magnetic induction,
mT.
Power -
220V ±
22V
, 50Hz
± 0.5
Hz or
220V ±
11V
, 400 (+
28
/ -12
) Hz.
Power consumed by device
gauss meter
PSH1
-10
- is
not more than
50 V
∙
A
Replaces SH1
-8;
Device
gauss meter
PSH1
-10
weight
-
8 kg
.
Dimensions –
304x133x320mm
.
Manufacturer
guarantees gauss meter
PSH1
-10
quality in accordance with technical requirements
TY
, i
n compliance with
consumer
terms and conditions
of storage, transportation
, setting, operation,
established
in
specifications and
operational documentation
.
Warranty 12mounth.
Delivery term
This device is available in stock right now.
I can send it at one day after your payment.
But due to the fact, that this device is of high precision, it should be calibrated before shipping.
I calibrate and test all my devices.  Calibration time may take from
1-14 days.
(depends on device, usually it takes
3 days.
).
I can send it at one day after your payment but without any calibration. Please chose.
I can supply you such device of fresh years of manufacture
2011-2012,
but the price of such device will be approximately 20-40% higher or more.
This device also can be named as:
SH1-10 ,
SH110 ,
SH1 10 , ш
1-10 , ш
110
, ш110 .
Photos
If necessary we can take photos of a device from various angles.
Technical Documentation
In case you didn't find in technical specifications for the device all necessary information you are interested in, feel free to contact me.  I will look through the technical documentation for the device and I will be happy to consult you.
Also I may speak directly with the manufacturer and find out more specific information about this product.
If some technical parameters for the device (error, accuracy, measuring range, operating voltage and frequency) do not meet your requirements, please, e-mail me and I will negotiate with the manufacturer whether it is possible to deliver you a device on the desired specifications without a cost increase and in the shortest time.
On delivering the device, electric circuit diagrams and all technical documentation for operation, calibration and maintenance will be supplied. Also there will be documents that testify the accuracy and compliance with specifications.
In addition, translation of technical documentation into the customer’s language may be discussed.
Delivery set
On delivering the device will be completely ready for use.
There are all necessary cables, adapters, sensors and spare parts as envisaged in technical documentation. Hence, there is no point in purchasing any additional repair & measurement equipment.
Warranty
Warranty of this item
- 12  month.
Before sending a device, all devices are checked whether they comply with all technical specifications.
Highly qualified metrology engineers carry out the check-up of every instrument at a specialized laboratory and with the help of master gages.
If necessary, we can send you photos or video with the check-up process.
I ship only fully working devices complying with all parameters.
The warranty for this device is 1 year from the date of shipment from my warehouse.
Within 1 year term I will provide the repair of the device for free in case of manufacturing defect or when the technical parameters do not comply with technical documentation. You will have to pay only for delivery.
When a device is out of order due to your fault (its fall, it is flooded with water, the power supply does not meet the specified technical requirements, input signals exceed the norm, etc.) or there are conspicuous marks of casing opening (broken warranty labels), it is considered a non-warranty repair.
Within 1 year term we can advise you for free on the device operation.
After-warranty service
After warranty termination I can arrange a paid repair and technical maintenance of a device as well as I can sell you all necessary spare parts for repair at minimum prices. I always have them in stock.
Packaging
Immediately after checking, the device will be wrapped in several layers of strong air-bubble film and placed into a strong cardboard box. Extra cardboard plates will be used for fixation.
If necessary, wooden box or pallet may be used. For a more reliable fixation foam can be applied. The whole box will be placed in a waterproof polyethylene bag which will be wound with several layers of packing tape.
A special handle will be made for ease of transportation.
Thus, I guarantee qualitative and conscientious packing of the device that reduces to minimum the possibility of damage during transportation.
Discount (from-10% to -90%)
I suggest you a device which is unique in its class and price category with the following specifications: (accuracy, measurement range, error, temperature operating conditions), endurance and durability (military performance, aluminum, stainless steel, titanium or carbolite casing, shock and vibration resistance, high maintainability and reliability), free measuring kit (cables, adapters, load, fuses, etc.), 1year warranty.
Unused cheap devices with the same specifications, accuracy and durability do not exist.
If you consider the price for this device unreasonably high, and you know the similar equipment at a lower price, please, let me know.
I will help you to compare these two models. In case your model (which is cheaper) is the same as the device I suggest or even it is better, then
I guarantee to sell you a unit at that cheaper price with additional 10% discount.
Shipping details:
Please, mind that I ship from Ukraine (Europe, +2), so that the shipping time may differ from your local time.
I send goods via AirMailpost.
App. delivery time :
Europe – 7-15 days;
USA, Japan&others – 10-20 days (depends on a country).
I will ship in 10-15 business days after payment clearance.
The goods may also be delivered by the express mail services such as DHL, UPS, FedEx, TNT or EMS.
With express delivery you will mostly receive your goods within 3-7 working days.
Payment details:
I expect payment in 4 days after the auction ends.
I accept a PayPal payment as the safest way of payment (preferably).
If you do not have a PayPal account you can pay by wire transfer to my credit card.
Other variants of payment are acceptable, for example in case of pickup way of shipping, i can accept cash payment.
(This will be an official purchase on eBay).
Please, tell me if you cannot pay in time, we can always negotiate it.
When purchasing a few items, you’ll save on shipping.
Return policy:
I accept refunds and returns. If there is something wrong with the device, please, inform me within 5 days after receiving it.
I will refund your costs or send you the other item, as you wish (
after I receive the previous item
).
Please only serious bidders!